News
-
WITTMANN BATTENFELD with smart injection molding technology at the FIP
Iranpolymer-According to Baspar, At the FIP Solution Plastique 2017 held from 13 to 16 June in Lyon, WITTMANN BATTENFELD will present state-of-the art injection molding technology, automation and peripherals to interested trade visitors at booth E12/G19.
Read More » -
VDMA supports Industry 4.0 Conference at CHINAPLAS
Iranpolymer-According to Baspar, The interest shown by Chinese converters in Industry 4.0 technologies remains undiminished. In hosting the 2nd Industry 4.0 Conference at this year’s edition of CHINAPLAS, to be held from 16 to 19 May in Guangzhou, the trade fair’s…
Read More » -
High quality and efficiency in standard injection moulding
Iranpolymer-According to Baspar, WINTEC will be using two machine exhibits to demonstrate how high profitability can be combined with quality and energy efficiency for a wide range of standard machine application requirements at Chinaplas 2017, which takes place from May 16th…
Read More » -
Iranian researchers: Conversion of Polymeric bottles to thermal insulations
Iranpolymer-According to Baspar report, by increasing the production capacity of polymeric bottles and different challenges of recycling, Iranian researchers were guided to find a method for recycling them and finally they suggested production of special foam from this material that will…
Read More » -
Smart Production at the Plastpol 2017
Iranpolymer-According to Baspar, At the Plastpol 2017, to be held from May 23 to 26, the WITTMANN Group with its subsidiary WITTMANN BATTENFELD Polska will present state-of-the-art injection molding technology, automation and peripherals at its booth No. F14 in hall F.
Read More » -
Smart Manufacturing Technologies to feature in CHINAPLAS 2017 to support electronics & electrical industries
Iranpolymer-According to Baspar, As market expands, the electronics & electrical industries are promoting healthier, trendier and cozier life experience to customers by introducing functional novelty to their products, such as degermation in refrigerators, self-cleaning and sterilization in air-conditioners. At the same…
Read More » -
Smart factory, step by step
Iranpolymer-According to Baspar, With inject 4.0., ENGEL is supporting the injection moulding industry worldwide in taking full advantage of the opportunities presented by the fourth industrial revolution. At Chinaplas 2017, May 16 to May 19, in Guangzhou, China, ENGEL will present…
Read More » -
WINTEC at Koplas 2017: High quality, economically produced
Iranpolymer-According to Baspar, With a focus on productivity, quality and energy efficiency, WINTEC builds injection moulding machines tailored to the requirements of standard applications. At the Koplas 2017, from March 7 through March 11, in Goyang, South Korea, with the production…
Read More » -
For the first time more than 30,000 visitors! New records set at European Coatings Show
Iranpolymer-According to Baspar, More than 30,000 trade visitors from far more than 100 countries and 1,135 exhibitors from 40 countries – the European Coatings Show 2017 was bigger and more international than ever. The show continues to expand its position as…
Read More » -
CHINAPLAS 2017 facilitates building and constructionindustriestowards green, high efficiency and sustainability
Iranpolymer-According to Baspar, Sustainability is now the first item on every industry’s agenda for development. In the face of such environmental issues as global warming, energy shortage, drastic decrease in forest resources, pollution and so on, how do the building and…
Read More » -
Iran Plast 2017 will be held on September
Iranpolymer-According to Baspar, The 11th International exhibition of Plastics and Rubber, Machinery and Equipments will be held on 24 - 27 September 2017 at Tehran international fair ground, Iran.
Read More » -
WITTMANN BATTENFELD with latest high-tech injection molding technology at the Chinaplas in Guangzhou
Iranpolymer-According to Baspar, From 16 to 19 May, WITTMANN BATTENFELD will present latest injection molding technology for the plastics industry to trade visitors at the Chinaplas in Guangzhou, the largest plastics fair in the Asian region, at booth 4.1C01.
Read More » -
WACKER Presents Sustainable Silicone Resins for New Weathering- and Heat-Resistant Coatings and a New Dispersion for Fireproof Coatings
Iranpolymer-According to Baspar, at the European Coatings Show (ECS) 2017 from April 4 to 6 in Nuremberg, the Munich-based chemical Group WACKER will present the new binder SILRES® REN70-M, which is used in high-temperature coatings to ensure extreme heat resistance up…
Read More » -
IPCC 2017 will be held on October
Iranpolymer-According to Baspar, The 17th International Paint, Resin, Coatings & Composites Fair (IPCC 2017) will be held on 6 - 9 October 2017 in Tehran, Iran.
Read More » -
VDMA: 2016 ends better than expected for German plastics and rubber machinery manufacturers
Iranpolymer-According to Baspar, German plastics and rubber machinery manufacturers can look back over the past year with great satisfaction. 2016 as a whole saw substantial growth in sales, continuing the positive trend of the past few years. “At 4 per cent,…
Read More » -
Hybrid technology from WITTMANN BATTENFELD for production of high-precision optical parts
Iranpolymer- According to Baspar, Manufacturing premium-quality optical components requires machines and tooling which meet the highest standards of precision and repeatability. To produce large-size parts in this segment, UPT-Optik Wodak GmbH based in Nuremberg, Germany has been using a hybrid machine from…
Read More » -
The 3rd Medical Plastics Conference to promote innovations in medical industry
Iranpolymer- According to Baspar, The medical industry is growing fast globally as economies develop, populations expand, societies age, and health care awareness increases. Global sales in 2015 soared to USD 1.1 trillion for the pharmaceutical industry, while medical devices sales reached USD 350 billion, according to…
Read More » -
Innovative technologies in CHINAPLAS2017 steers global packaging industry towards weight reduction and sustainability
Iranpolymer- According to Baspar, as awareness and understanding of sustainability become ever more prevalent, the packaging industry is turning its focus toward ssustainable packaging. Lightweight and green packaging has become the bandwagon for the packaging industry to get on in order…
Read More » -
FDC pipe extrusion line delivers ultimate flexibility in diameters and wall thicknesses
Iranpolymer- According to Baspar, “battenfeld-cincinnati was the only machine manufacturer able to meet our requirements in terms of full automation and ultimate flexibility”, is how Kenn E. Byllemos, COO of Emtelle Denmark based in Sønder Felding, explains their decision to work with…
Read More » -
China – An Important Market for Plastics and Rubber Machines
Iranpolymer- According to Baspar, In 2015 worldwide supplies of plastics and rubber machines to China again reached a volume of 2.1 billion Euros, which was a decrease of 13.6 % compared to the preceding year.
Read More »