News

Global Giants of Medical Plastics Industry Unveil the Trend of Future

CHINAPLAS will launch its 30th edition on April 25-28, 2016 and the Medical Plastics Conference will stage its 2nd edition at the fairground on April 25 and 26 to share high-end technology and remarkable insights, and demonstrate how medical plastics technology drives the innovation of the medical industry. 

 


CHINAPLAS will launch its 30th edition on April 25-28, 2016 at Shanghai New International Expo Centre, PR China. With immensely positive audience feedback in the last edition, the Medical Plastics Conference will stage its 2nd edition at the fairground on April 25 and 26 to share high-end technology and remarkable insights, and demonstrate how medical plastics technology drives the innovation of the medical industry. 

At the conference, Shanghai MicroPort Medical (Group) Co., Ltd. will share “The Technology of Precision Medical Polymer Tube for Invasive Medical Device”. Precision medical tubes are widely used in invasive medical devices, and their properties will determine the performance of these invasive devices. The presentation will introduce the technologies in producing precision medical polymer tube, which are critical in deciding their properties. 

Besides, Ms. Stefania Marconi, Biomedical Engineer, PhD in Experimental Surgery and Microsurgery from the University of Pavia, will discuss about “Plastic Materials in 3D Printing: Surgical Planning and Clinical Applications”. Her presentation will focus on standard plastic materials to high-resolution photopolymers to biocompatible materials, the applications of 3D printing on anatomical prototyping for surgical planning, and 3D printing of biocompatible implants. Information about the speakers and topics of the conference are listed below: 


April 25

Company and Speaker Topic
Tianjin Plastics Research Institute Co., Ltd.

Mr. Ming Wang, Assistant Manager
Applications of PEEK in Medical Sector
RTP Company

Mr. Ray Zhang, Healthcare Marketing Manager-Greater China
Plastic Technology That Resists Chemical Attack from Hospital Disinfectants
University of Pavia

Ms. Stefania Marconi, Biomedical Engineer, PhD in Experimental Surgery and Microsurgery
Plastic Materials in 3D Printing: Surgical Planning and Clinical Applications
Shanghai MicroPort Medical (Group) Co., Ltd.

Dr. ZhaoMin Lee, Senior Manager of Precision Tube Technology Center
The Technology of Precision Medical Polymer Tube for Invasive Medical Device





April 26

Company and Speaker Topic
Osmunda Medical Device Service Group

Mr. Mike Gu, Managing Director
Current Application Situation of Medical Device with Plastics as Main Materials
Covestro Polymer (China) Co., Ltd

Mr. Raymond Wong, Product Technology Manager, Medical &Consumer Products, Polycarbonate Asia Pacific
Covestro Makrolon® Polycarbonate Technical Solution for Medical Device
University of Applied Science Amberg-Weiden

Prof. Dipl.-Ing. Burkhard Stolz, Program Director, Master's Program of Medical Engineering
Clean Room Manufacturing in Medical Technology





Cutting-edge Plastics Technologies are Under the Same Roof 

The medical plastics and processing technologies tailor-made for medical industry are kept on developing. This enhances the production efficiency and product quality of medical devices and disposable medical products, responding to the growing market demand and creating numerous business opportunities. In addition to the Medical Plastics Conference, CHINAPLAS 2016 will also exhibit a variety of medical plastics, molds for medical supplies and injection molding technology for the production of petri dish. Partial advanced exhibits include: 

Covestro Polymers (China) Co., Ltd. – Polycarbonate Makrolon® 
The patient swallows a small capsule with built-in camera, which is transported through the digestive tract while delivering images of the stomach and intestinal walls. The high-tech polycarbonate Makrolon® from Covestro, which is used for the capsule shell, is biocompatible and safe. Through its good formability it is allowing for a large filming angle for the camera.

Trelleborg Sealing Solutions Silcotech (Huizhou) Co.,Ltd – Liquid Silicone Rubber (LSR) injection molding 
Silicone parts are widely used in medical device and applications. Liquid Silicone Rubber (LSR) injection molding can produce clean, high quality with high precision medical parts. Morever, this technology enables us to produce dedicated silicone parts with low shot weight and with complex geometrical features.

Mold-Masters(Kunshan)Co.,Ltd. – Side Gating Solution- Melt-Disk, Melt Cube 
Melt-Disk and Melt Cube are specially designed for side gating applications. The Mold-Masters patented technology is perfect for deep draw parts such as pipette tips, syringe barrels, needle shields or smaller parts where only side gating is permitted.
Formosa Plastics Corporation -Yungsox medical PP product 
Yungsox medical PP products are suitable for IV bottles/bags, syringes and pharmaceutical bottles. These materials offer superior properties such as excellent heat resistance, transparency and low extractions in n-hexane. They meet the requirements of USP Plastic Class VI and certificated with DMF, file no. 24843.

Clariant Chemicals (China) Ltd.- MEVOPUR® Masterbatches and Compounds for Medical and Pharmaceutical Applications 
Designers and manufacturers of medical devices and pharmaceutical packaging invest significant time and money in meeting performance and regulatory standards to fulfill the increasingly stringent demands of these global markets. Materials that can help minimize the risks and costs of non-compliance in a product’s development and lifecycle are vital to this process. To meet preferred manufacturing processes, colors and/or functional additives are provided as concentrate masterbatches for dilution into another polymer or as small lot pre-color compounds. 

ARBURG (Shanghai) Co Ltd – Tablet Cutter 
ARBURG will show one automation system for tablet cutter production with 4+4 hot runner mould, metal cutter insert loading, finished parts take out and parts assembly will be integrated in one automation system, the size of tablet cutter is about 80*40*20mm,material is PC. It is used to split the tablet in two parts and it can also save several tablets. 

There are two types of entry tickets – a one-day pass (RMB 30) and four-day pass (RMB 50). Admission is free on 28 April, 2016. Visitors who successfully pre-register on or before 19 April, 2016, at www.ChinaplasOnline.com/prereg will enjoy free admission. 

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button