injection – ایران پلیمر

Huntsman launches new SHOKLESS polyurethane systems for electric vehicle batteries

نویسنده — Mon, 22 Apr 2024 06:51:35 +0000

Iranpolymer/Baspar Tienen, Belgium – Automotive experts from Huntsman have added a series of new lightweight, durable polyurethane foam technologies to the company’s battery solutions portfolio that have been developed for the potting and fixation of cells mounted in electric vehicle (EV) batteries. The new range also includes products that can be used as a moldable …

Raise a glass: Aimplas producing bioplastics from beer production waste

نویسنده — Sun, 26 Nov 2023 06:23:00 +0000

Iranpolymer/Baspar Valencia-based Aimplas, the Spanish Plastics Technology Centre, is coordinating a project for the development of polyhydroxyalkanoates (PHA)-based packaging solutions derived from beer production waste. Called BioSupPack, the research programme also focusses on demonstrating a feasible depolymerisation recycling process for the new solution. The research group brings together 17 partners from eight countries and has received …

TekniPlex Healthcare introduces PVC and TPE antimicrobial compounds

نویسنده — Sun, 05 Nov 2023 06:23:47 +0000

Iranpolymer/Baspar TekniPlex Healthcare has introduced antimicrobial medical compounds that can be utilised to produce a number of patient-contact products, including catheters, connectors, gas hoses, injection systems such as syringes, and needle-free injectors such as pens. Currently, TekniPlex is offering polyvinyl chloride (PVC) and thermoplastic elastomer (TPE) compounds formulated with silver ion technology. To develop its antimicrobial …

Wittmann Battenfeld to present its new EcoPower B8X at Fakuma 2023

نویسنده — Tue, 03 Oct 2023 05:54:57 +0000

Iranpolymer/Baspar WITTMANN BATTENFELD will present its new EcoPower B8X to trade visitors at Fakuma 2023 from October 17 to October 21 at its booth 1204 in hall B1. In comparison to its predecessor, the company claims that this new machine stands out by even greater energy efficiency, an extended range of injection units and higher precision …

HASCO’s Steamrunner aims to produce injection moulded parts cost-effectively

نویسنده — Thu, 07 Sep 2023 08:11:25 +0000

Iranpolymer/Baspar The Streamrunner is an additively manufactured hot runner with ‘maximum design freedom.’ HASCO claims that with this technology the flow channels can be optimally designed in rheological terms by completely avoiding sharp edges and areas with poor throughflow properties. This gentle passage of the melt leads to considerably lower shear rates and consequently to better …

SABIC launches two new materials- suitable for compression and injection moulding

نویسنده — Sun, 16 Jul 2023 05:14:51 +0000

Iranpolymer/ Baspar SABIC, a global chemicals producer, has introduced SABIC PP compound H1090 resin and STAMAX 30YH611 resin, two materials that the company says are well-suited for sheet extrusion and thermoforming that offer a unique alternative to traditional sheet metal forming, compression and injection moulding, allowing customers to form large, complex structural parts. These new products …

Custom 3D Printed Parts Made From Bio-based Elastomers

نویسنده — Sat, 15 Jul 2023 05:37:17 +0000

Iranpolymer/ Baspar Erpro 3D Factory has developed an integrated supply chain in Europe to produce custom parts made from Arkema’s bio-based elastomers using selective laser sintering technology. Arkema’s Pebax Rnew elastomers are produced partially from castor beans and have been used in demanding applications including sport shoes, consumer electronics, and medical devices. According to Arkema, the …

Engel: Ten percent shorter dry cycle time

نویسنده — Wed, 14 Dec 2022 07:24:38 +0000

Baspar / Iranpolymer In high-speed applications, the time it takes for the injection molding machine to open and close the mold is a significant component of the cycle time. Like a robot arm, the movable mold clamping platen of the injection molding machine does not just move up and down, but along individual movement points. These …

Engel: More recyclate in sandwich components

نویسنده — Mon, 19 Jul 2021 06:04:26 +0000

Baspar / Iranpolymer The new coinjection process, which Engel, Schwertberg (Austria) developed together with Top Grade Molds, Mississauga (Canada), enables a high proportion of recycled material to be completely enclosed in new goods in the manufacture of buckets and is therefore superior to conventional sandwich injection molding processes. The new process was able to demonstrate …

WITTMANN BATTENFELD presenting the first machine of its highly dynamic EcoPower Xpress series at the K 2016

تبسم علیزاد منیر — Tue, 04 Oct 2016 02:34:26 +0000

Under the motto “be smart”, WITTMANN BATTENFELD is showcasing its first all-electric high-speed machine model at the K 2016 in Düsseldorf from 19 to 26 October in hall 16, booth D22.

Netstal to demonstrate its outstanding application expertise in the field of cosmetics closures at Plastpol

تبسم علیزاد منیر — Sat, 07 May 2016 05:14:57 +0000

At the stand of its Polish representative Muehsam-Elektromech, Netstal will present the production of high-quality flip-top closures on an all-electric ELION 2200 at the Plastpol trade fair in Kielce, PL (17-20 May 2016, Stand F1). Customers and visitors can also find out about Netstal's high application and system expertise within the care product closure sector.