News

Life Cycle Analysis Shows Pyrolysis Can Reduce Carbon Footprint of Cracking Operations

Iranpolymer/Baspar  A study published in The Journal of Cleaner Production, and supported by funding from the American Chemistry Council, describes greenhouse gas (GHG) benefits of substituting pyrolysis oil from post-use plastic for naphtha and fossil fuel gases in steam cracking operations.
The study considers two types of facilities, pioneer facilities with a capacity of less than 50,000 tons/year and “Nth” facilities, with capacity greater than 50,000 tons/year. The scaling factor is significant, the use of pyrolysis oil in pioneer facilities increases GHG emissions, while GHG emissions from Nth facilities are lower than that of conventional operations.
The study also considers two substitution ratios, 5% and 20%. When substituting only 5% pyrolysis oil for naphtha and gases, the elimination of chlorides and other contaminants by hydrotreatment is not necessary. Hydrotreatment contributes significantly to the GHG emissions of using pyrolysis oil. At a substitution ratio of 20%, hydrotreatment is necessary to protect equipment, bringing down the GHG benefit on a per kilogram basis.
From the recycler’s perspective, the substitution of pyrolysis oil provides a 23% reduction for HDPE production and an 18% reduction for LDPE production. However, these numbers set aside the 95% of production still being carried out by traditional means in this scenario. The producer still needs to source the other 95% (from fossil fuels) in order to make the 5% recycled material, so from the cracker’s perspective the benefit is around 1%.
Expanding the system boundaries to include end-of-life disposal increases the GHG benefit further, especially when compared against incineration.
The authors identified the availability of operational data on steam cracking and hydrotreatment processes as a limitation of the study. Detailed information is considered proprietary, and values were based on available literature and discussions with industry partners.

ptonline

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button